How to Pair Your zooZ 4-in-1 Sensor with Ezlo

This guide demonstrates how easy it is for you to pair a zooZ 4-in-1 Sensor with Ezlo Atom.

We will go through a pairing process that also applies to all the other line-up of our Controllers.

First, open the plastic cover of your zooZ 4-in-1 Sensor to insert the battery.

Note: Refer to the manufacturers’ manual for instructions on positioning and installation.

Tap the menu icon in the Vera app and go to “Devices.”

Go to the ‘+’ menu on the top right-hand corner, select “Sensors,” then look for “zooZ 4-in-1 Sensor,” and select it.

When ready, press “Next” to commence the pairing process.

On the zooZ 4-in-1 Sensor, use a paper clip to press the Z-Wave pairing button twice, and the onboard LED will blink twice to confirm it’s working.

Ensure the Sensor is near the controller throughout this process.

The controller will recognize the Sensor and pairs it with your system.

In the Vera app, choose the name for the Sensor and choose a room to finalize the process.

Congratulations.

Your motion sensor is now working, and you can monitor or use it to trigger a scene in your Vera app.

1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Rating LoaderLoading...

What device would you like to integrate?

At Ezlo we work with an industry-leading number of devices, but if there’s a Z-Wave or Zigbee device we don’t currently work with that you’d like to see us integrate, just fill out the form below to let us know. We’ll get it done within 90 days.*

*Integration requests available for Z-Wave and Zigbee devices that are commercially available, as defined by Ezlo.

Tell us about your device

Thank you for choosing Ezlo

Please check your inbox, your case study will be arriving soon.